Home / Products / Industrial PC / Half Size SBC -- JD-6311VL
Half Size SBC
JD-6311VL


Features General Specifications  

Features
• P-III Low power C3 SBC
• SVGA, CRT, LCD
• Single LAN
• C&T69000 w/ 2 MB VRAM

General Specifications
• CPU
Socket 370FC-PGA/FC-PGA2 supports Intel Pentium 3 ,Low Power C3 CPU up to 900Mhz with FSB @ 100/66 MHz

• System Chipset
Intel® 440BX

• BIOS
AMI 256KB Flash BIOS including
VGA/LCD BIOS and LAN Boot ROM

• Green Function
power saving supported in BIOS. DOZE /STANDBY / SUSPEND modes, ACPI & APM

• Secondary Cache
Integrated on CPU ,support ECC function

• SDRAM Memory
Support up to 256MB of PC-133 or PC-100 Registered SDRAM in one 168-pin DIMM sockets

• PCI Enhanced IDE with Ultra DMA
ATA66/33 IDE Port x 1 Support up to 1 x IDE devices, support two IDE HDD, Ultra DMA transfer rates 33 MB/sec

• Watchdog Timer
4 level programmable watchdog timer, from 10~80 seconds.

• Real-time Clock
built-in super I/O with lithium battery backup for 10 years of data retention. CMOS data backup of BIOS setup and default.

• DiskOnModule/DiskOnChip
Support DOM up to 512MB/DOC up to 288MB

• PCI bus
Supports 32bit PCI bus

• High Speed Multi I/O
2 x Serial ports: 1 x RS232, 1 x RS-232/422/485

• Floppy Disk Drive Interface
1 x floppy disk drives, 5º" (360 KB or 1.2 MB) and 3½" (720 KB, 1.44 MB) or LS-120 Drive

• Bi-directional Parallel Port
1xSPP, EPP and ECP mode.

• Compact Flash socket
Support Compact flash socket and IBM 1.8" MicroDrive 340MB/1GB

• Keyboard and Mouse Connectors
external PS/2 KB/Mouse port (2-in1 mini DIN)
onboard AT Keyboard port (5-pin box header)

• Network Interface Controller LAN Chipset
1x Realtek 8139C support 10/100 Mbps LAN Management

• Support Intel LAN Desk Service Agent 6.0

• Display Controller - VGA Chipset
C&T69000 w/ 2 MB VRAM

• LCD
Support AGP 2X,1x LVDS connector support LCD,DV1.0

• Audio
AC97 Audio on board

• Display Type
CRT (VGA, SVGA, XGA, SXGA) & TFT LCD

• System Monitoring and Alarm
For CPU & System Temperature, System Voltage and Cooling Fan RPM Temperature/fan monitoring 686B on chip function

• Environmental and Power
Power Requirements
+5V 5.3A and +12V 0.1A max. (Based on 500 MHz)

• Board Dimensions
185 mm x 122 mm.PICMG 2.0 Compliant

• Board Weight
0.3 Kg.

• Operating Temperature
0 to 60°C (32 to 140°F)

 
   
 
 
 
 
Deutsch Italiano Français España Russian